Europafilter UKDK Ltd

Our product is totally unique in its proven capabilities in all aspects of industry, especially offshore and marine, injection moulding, nuclear, wind farms, and the Paper & Pulp industry. We have enjoyed many successes with blue chip clients, if you visit our website there are many case studies which may interest you, just click on the USA flag.
Investing in a Europafilter on HPU's, injection moulding machines, hydraulic cranes, bow / stern thrusters and bow doors system, gearboxes any industry where oil is used for lubrication could see maintenance costs and down time reduce by 85%, showing a ROI in a matter of hours, if not weeks in most cases.
Our unique side stream filter cleans oil down to 0.1 micron which means you will NEVER have to change the oil again, only the filter insert (which lasts approximately 7000 to 8000 hours) .This means, you will save around 90% of your oil costs, not only that, you will NEVER again have to dispose of the used oil, which is extremely costly in itself.
Europafilter removes particulates as small as 10 Nano, Varnish, Water and Salt. Varnish being the main contributor to valve failure, Salt being the main contributor to problems in offshore, wind farm and marine hydraulic systems, but Europafilter does not remove any of the additives in oil. No other single filter can do this, you would normally have to invest in expensive multi-stage filtration, which could only remove particles down to 3 micron, thus, leaving damaging particles in the oil.
Tests have shown that 70% of the total weight of particles in oil generally consist of particles that are smaller than 1 micron, and that 85% of all breakdown in gear boxes and hydraulic systems are caused by particles which are sub 1 micron.
You can visit www.europafilter.co.uk
Also, our product adheres to the government Waste Hierarchy this stipulates, the first step in waste, is prevention. Our unit does exactly that!

Related Suppliers By Main Products